HOW TO USE

Read the precautions carefully and use as directed.
*DO NOT USE if you have ever experienced skin irritation caused by a hair color product.
*Before each use of this hair color product, perform a skin allergy test (patch test) 2 days (48 hours) in advance.

MOVIE
Usage Instructions

  • The design of the packaging and contents may differ in parts, but how to use the product remains the same.

Before usage

  • Apply water-repellent cream to the area along the hairline, ears, and arms to prevent staining of the skin.
  • Make sure to comb your hair to prevent tangling.

STEP1. Mix the solutions

1

Pour all the contents of solution 1 into the bottle of solution 2.

img_howto01-1@4x

2

Immediately close the flat cap, turn the bottle upside down and then back. Repeat 5 times, for 1 second each time.

Do not shake  the bottle.

  • Shaking will cause the mixed solution to bubble inside the bottle, and it may not dispense as foam.

Tips for  mixing Turn the bottle upside down  and back in 1 second Put on the  flat cap 1second Repeat  5 times

3

Remove the flat cap, replace it with the foamer cap, and close tightly.

img_howto01-3@4x

STEP2. Dispense foam

Wear gloves. With the container upright, press firmly on the center of the bottle to dispense foam onto your hands.

Dispense  generously Hold the container  upright and press  the center

  • Do not pull up the foamer cap when using.

  • If the mixed solution bubbles in the container or comes out in liquid, stand the container upright and press 3 or 4 times to discard any loose foam or liquid. Repeat 3 to 4 times to start dispensing the foam again.

STEP3. Apply a generous amount of foam

1

Starting at the parting and top of the head, apply foam dispensed on hands onto hair.

img_howto03-1@4x

2

For the back of the head, part the hair roughly to the left and right, apply foam and blend in.

img_howto03-2@4x

3

Apply generously to the hair tips.

Also apply  generously onto the  back of the head Apply generously onto the  hairline around the face  and to the ends of the hair

  • Avoid getting hair dye in your eyes when applying or washing your hair. If the product gets into the eyes, do not rub. Rinse immediately with plenty of water for at least 15 minutes.

STEP4. Massage into hair

After applying foam, gather your hair and gently massage in with your fingers.

Spreading the thick and creamy  foam to hair roots will dye  hair evenly and beautifully  Application on the  back of head  is also easy!

  • For a beautiful finish, add more foam if it is insufficient.

STEP5. Check - Leave - Finish

1

Make sure there is no foam or mixed solution on anything other than your hair, and that your hair is not tangled.

2

Allow the foam to stay in your hair for 20 to 30 minutes, with the entire hair wrapped in foam.(About 30 minutes for restoring hair color)

img_howto05-1_1912

3

Thoroughly rinse out the foam and shampoo your hair. Complete with the rinse-off treatment that comes with the product and rinse off.

Rinse-off  treatment

Page Top